Spot Out - Nuvico DV turbo NVDV4-16000 Instruction Manual

3.4 SPOT OUT

In addition to the Main Monitor, attaching a Spot Monitor enables user to monitor
specific channels independently from the main monitor.
• By pressing onto F1 from the Remote Control or Shuttle Hold from the unit, and
entering the channel number will bring that specific channel into Full Screen.
• By pressing Spot button twice, all the channels will start to sequence in Full Screen
mode. Sequence Interval can be set from Sequential Setup. (Refer to Page 57)
• When Alarm has been triggered, that specific channel will go into Full Screen Mode.
Use the directional buttons to move the zoom window to the
desired location.
Press the Enter button once more to zoom into the selected
area on the screen. Use the directional buttons to move
the zoomed window around the screen. Pressing + again
will zoom in into 4x the mode, and once again to zoom in
into the 8x mode. Press Enter button and Press – button to
zoom out to 4x mode and again to 2x mode.
Press the Cancel button to return to the normal view.
29
DV TURBO SERIES DVR