Automatic Sequence - Nuvico DV turbo NVDV4-16000 Instruction Manual

3.2 AUTOMATIC SEQUENCE

There are several different sequence modes that can be selected and activated. Please refer to page 55
for selecting and activating the different display sequence modes. Press the display button and hold onto
to it for 1 second to activate the sequence mode. Pressing the display mode will change the display
mode to the single channel display initially, and continue to sequence through all the channels in full
screen mode if single channel sequencing is selected. If any other display sequencing modes are
selected, then the sequence will move onto the next set of display sequences automatically. All display
modes can be included and combined into the automatic sequence mode. The following illustrations
demonstrate sample display sequences and their combinations.
Single Channel view mode automatic sequence
Quad view mode automatic sequence
27
DV TURBO SERIES DVR