Advanced Recording; Alarm Recording - Nuvico EV-4000 Instruction Manual

3. ADVANCED RECORDING

Advanced recording comprises of alarm, motion and schedule recording. Unlike the continuous
recording mode which records 24 hours a day and seven days a week based on the same settings,
these three recording options provides the user the flexibility of customizing the record settings, thus
making the most of the hard disk drive usage. Moreover, using these features would shorten search
time when the needs arise, as the recorded can be directly accessed from the system logs.

3.1 ALARM RECORDING

Please verify the alarm record settings prior to starting alarm recording. The settings can be adjusted
from the ALARM setup. Please note that alarm recording is independent of any recording modes.
If the alarm buzzer is set to ON and if the alarm inputs are selected, then the alarm buzzer will sound
for the duration of the RECORD TIME. Pressing the – button will turn off the buzzer, and pressing +
button after will turn the buzzer back on. Press CANCEL button will turn off the alarm circuit.
Press the RECORD button and the record icon will
appear as shown on the left. The DVR will be in standby
mode until an alarm is triggered.
Alarm record icon will appear on the channel alarm was
triggered. The channel number will turn yellow as it starts
to record. The illustration on the left shows channel 3 in
alarm recording mode. The duration of the recording will
be based on the RECORD TIME setting under ALARM
SETUP.
34
MPEG-4 DVR