Press the Enter button once more to zoom into the selected area on the screen. Use the directional
buttons to move the zoomed window around the screen. Pressing + again will zoom in into 4x the
mode, and once again to zoom in into the 8x mode. Press Enter button and Press – button to zoom
out to 4x mode and again to 2x mode.
2.3 SPOT OUT
In addition to the Main Monitor, attaching a Spot Monitor enables user to monitor specific channels
independently from the main monitor.
•
By pressing onto [SPOT] from the Remote Control, and entering the channel number will bring
that specific channel into Full Screen.
•
By pressing [SPOT] button twice, all the channels will start to sequence in Full Screen mode.
Sequence Interval can be set from Sequential Setup.
•
When Alarm has been triggered, that specific channel will go into Full Screen Mode.
Press the Cancel button to return to the normal view.
18
MPEG-4 DVR