Press the ENTER button to zoom in to the selected area on the screen. Use the directional buttons to
move the zoomed window around the screen. Press the [+] button once more for 4x zoom mode, or
press the [-] button to zoom out to 2x mode.
2.3 SPOT OUT
In addition to the main monitor, attaching a spot monitor enables user to monitor specific channels
independently from the main monitor.
x
By pressing the SPOT button on the remote controller, followed by the channel number will call up
the specified channel in full screen.
x
By pressing SPOT button twice, all the channels will start to sequence in full screen mode.
Sequence Interval can be set from Sequential Setup.
x
When Alarm has been triggered, that specific channel will go into Full Screen Mode.
Press the CANCEL button to return to the normal view.
- 22 -