Automatic Sequence; Zoom - Nuvico NVDV3-4000 Instruction Manual

3.2 AUTOMATIC SEQUENCE

There are two different sequence modes that can be selected and activated. Please refer to page 52 for
selecting and activating the different display sequence modes. Press the display button to activate the
sequence mode. Pressing the display mode will change the display mode to the single channel display
initially, and continue to sequence through all the channels in full screen mode if single channel
sequencing is selected. If quad screen display sequencing mode is selected, then the sequence will
move onto the next set of quad screen display mode automatically. The following illustrations
demonstrate sample display sequences.
Single Channel view mode automatic sequence
Quad view mode automatic sequence

3.3 ZOOM

During live view mode or during the playback, it is possible to zoom into a section of the screen to get a
close-up view of the section.
Press the channel number to go into the full screen mode.
27
DV 3 SERIES DVR