Headlight Assembly - Arctic Cat ZR 120 Service Manual

8. Connect the fuel hose to the carburetor and turn
the gas tank shut-off valve to the OPEN position.

Headlight Assembly

REMOVING

NOTE: The bulb portion of the headlight is fragile.
HANDLE WITH CARE. When replacing the headlight
bulb, the bulb assembly must first be removed from the
housing. Do not touch the glass portion of the bulb. If
the glass is touched, it must be cleaned with a dry cloth
before installing.
1. Peel back the rubber headlight socket cap; then
push in and turn the headlight socket counterclock-
wise and remove it from the headlight housing.
2. Remove the caps covering the four headlight
adjustment screws; then remove the adjustment
screws. Remove the headlight from the hood.
58
INSTALLING
1. Secure the headlight housing to the hood with the
four adjustment screws; then snap the caps on the
screws.

NOTE: The hood cable is secured with the lower right-
hand adjustment screw.
2. Insert the headlight bulb socket into the headlight
housing; then rotate the socket clockwise to lock it
into the housing.
3. Place the rubber headlight socket cap over the
headlight housing bead around the socket.

NOTE: To adjust headlight aim, adjust the four adjust-
ment screws until maximum illumination for the opera-
tor is apparent.
IO120A