Control Solution - Infopia Finetest Auto-coding User Manual

Blood glucose monitoring system

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

Automatic code recognition

Caution

1. Do not bend the test strip to prevent the Automatic code recognition failure.

2. If the code recognition label is damaged, the code recognition may fail. Please

check the code number on the LCD display window with the code number on

the test strip vial.

1 6

1. finetest Auto-coding

has automatic

code recognition function.

2. It recognizes automatically the code

number. This is a very convenient

function preventing the inconvenience

of setting the code number on the

meter every time.

the

Checking the system with the finetest Auto-coding

The finetest Auto-coding

Control Solution is used to check that the meter and the

test strips are properly working together to provide you with the most accurate

reading.

Note : The

Control Solution is sold separately. Low, normal and

finetest Auto-coding

high level control solutions can be obtained through your local representative.

Control Solution Test can only be used with the

should be used during the following cases:

•When a new vial of test strips is opened.

•Any suspicion that the meter or test strips are not working properly.

•When your blood glucose test results are not consistent with your symptoms, or if you

think they are not accurate.

•If you drop the meter.

•Use routinely to obtain accurate results.

When the control solution is applied to the top edge of the

Strip, you should get results within the expected range printed on the label of the test

strip vial. If the control solution test results fall outside the range, repeat the test. Results

that fall out-side the range may be caused by:

•Error in performing the test.

•Failure to shake the control solution vial well enough (must shake vigorously).

•Failure to discard the first drop of control solution.

•Expired or contaminated control solution.

•Test Strip deterioration.

•Meter malfunction.

•Control solution that is too warm or cool.

Checking the system with