Collecting A Drop Of Blood - Infopia Finetest Auto-coding User Manual

Testing Your Blood - Collecting a Drop of Blood
1. Unscrew the lancing device tip and insert
2. Pinch the lancet and twist off the
3. The tip of the lancing device offers 5
4. Hold the tip in one hand and pull on the
5. Release the sleeve. It will automatically
6. Place the lancing device against the tip of
2 0
a lancet firmly into the carrier.
protective cover. Re-screw the tip on the
lancing device.
different levels of skin penetration, To
select the best depth: Use 1-2 for soft or
thin skin, 3 for average skin, 4-5 for thick
or calloused skin.
sliding barrel with other hand. Pull the
ends apart and you will feel a click. This
indicates that the lancing device is in a
locked position ready for lancing.
contract and move back to it's original
position near the trigger hub.
the finger. Press the trigger button. Your
blood sample should now be ready to be
applied on the test strip. Lift the lancing
device out and away.
Step 1
Firmly insert the finetest Auto-coding
test port. Insert down firmly in direction of arrow on test strip (arrow up). Please
do not insert the test strip upside down. When you insert the test strip into the
meter, the power automatically turns on with the code and temperature. After 3
seconds, the code number and testing temperature will disappear. When the
strip sign blinks, apply your blood to the test port of strip.
Note : Inserting the test strip in the wrong direction will turn the meter on, but you will be
unable to test.
Caution
1. If the code is not displayed after 3 seconds, pull the test strip out of the port, and
re-start the procedure from the beginning.
2. If the code on the LCD display window and on the test vial does not match, try
another new strip. If the mismatch persists, please contact your local
representative for help.
3. If the meter does not power on, pull the test strip out of the port, and re-insert the
test strip.
4. Avoid testing under direct sunlight, for a more accurate test result.
5. If you apply your blood sample too early, ERROR5 message will appear on LCD
( refer to p33).
Test Procedure
test strip into finetest Auto-coding
TM
Meter
TM
2 1