Ethernet Link Does Not Work - ORiNOCO AP-2000 Troubleshooting Manual

Ethernet link does not work

If you cannot access the HTTP (web browser) Interface or the Internet from
the Access Point, perform the following checks:
1. "Ping" the Access Point. If you cannot ping the Access Point, make sure
you have the correct IP Address for the unit you are working with. If the
AP-2000 responds to the ping, then the Ethernet Interface is working
properly; continue with this procedure.
2. Make sure you are using one of the following web browsers: Microsoft
Internet Explorer 5.0 or better, or Netscape 6.0 or better.
3. Make sure the "Proxy Server" on your web browser is not enabled.
4. Make sure you have not exceeded the maximum number of web, Telnet/
CLI, or serial CLI sessions allowed.
5. Double-check the physical network connections. Use a known-good unit
to ensure the network connection is present.
6. Perform network infrastructure troubleshooting (check switches,
routers, etc).
AP-2000 Connectivity Issues
9