ORiNOCO AP-2000 Troubleshooting Manual page 22

Reset and Reload Procedures
Example:
[Device name]> set ipaddrtype 10.0.0.12
[Device name]> set ipsubmask 255.255.255.0
[Device name]> set ipaddrtype static
[Device name]> set tftpipaddr 10.0.0.20
[Device name]> set tftpfilename MyImage
[Device name]> set ipgw 10.0.0.30
[Device name]> reboot 0
Result: The AP-2000 will reboot and then download the image file. Observe
the display and you should see downloading activity begin after a few
TFTP
seconds. When downloading has stopped, the AP-2000 is ready for
configuration, providing the AP-2000 IP Address is correct.
7. Once the AP-2000 image is downloaded and you have a valid AP-2000
IP Address, configure the AP-2000 as described in "Configuration".
22