ScoutGuard SG-660 User Manual page 9

Capture video:
In Test mode, can recording the video depend on the battery and memory capability; press OK for
stop recording, saving the video to the SD card automatically
5.5.) ON/Live mode
1. Switch OFF position to ON position/Live mode
Avoid temperature and motion disturbances in front of the camera such as big leaf,
curtain, air-conditioner, air outlet of the chimney and other heat sources to prevent
from false triggering.
2. The height from ground for placing the camera should vary with the object size
appropriately. In general, 1.5 to 2 meters are preferred.
When the power switch is moved to the top position, the camera will enter into the
ON/Live mode; the motion indicator LED will blink green for about 15 seconds.
When human or animals enter into the monitoring region, the trail camera will take photos
or videos automatically according to the default settings or previous customer settings, are
saved on the SD card. The camera has the sound recording function, so the sound will be
embedded in the video clip while capturing a video.
Once in the ON mode, no manual controls are needed or possible (control keys no have effect, the
screen is off.)
5.6.) Menu shown as right fig.3
Playing back/Reviewing image/Deleting the photos/videos
There are four ways to review picture, the four ways as bellow:
a.) With camera, connect the device to the PC with USB extension cable)
b.) Connect the device to the TV monitor, should be in the TEST mode)
c.) Without camera, take out SD-card; use PC with SD-card viewer)
d.) Review with camera LCD directly
Four ways for review:
Fig.3
- 8 -