ScoutGuard SG-660 User Manual page 28

2:In GPRS Setting mode. Please input the correct data according to the user's manual and the
information from your local communication provider. Before using MMS function, It is
recommended to use the network service provider which have wide fraction of coverage for
making high quality signal, and get correct inputs information from them.
3: Switch to Test mode, setup the GPRS mode to "ON", then setup "GPRS setting" mode and
"Send To" mode. Press "Left" key for searching the GPRS signal, if it is success, it will shown
as "Signal search done". If fail, it will shown as "signal search fail"
4: Make sure the camera is successful to search the signal, then Switch to ON position(Live
mode),you can use MMS function and share the pictures with your friends.
5: Make sure you sending camera and receiving mobile have enough charge, and check them in
a period of time.
6: Make sure sending camera and receiving mobile have normal signal.
7: Make sure SD card in sending camera, receiving mobile and mailbox have enough memory.
8: Avoid serious crash on the camera.
Q:How to do if you can't take out the SD and SIM card?
A:To take out the SD or SIM card, just push in the card gently, the card is released from the
slot when you hear a slight snapping sound.
Q: Why the photo time is different with receiving time via email or MMS in the
mobile ?
A: usually with in 15s-2mins, you can receive them.
Sometimes it delayed For the Email, it effect by your computer or email setting.
Q:After insert SD card, switch to TEST mode, the LED is always blink ,but the TFT LED
display is not working?
A: The SD card maybe broken. Please change one new SD and try it again. It is impossible that
SG660 series will damage your SD card, due to it is only designed for picture or video stored.
There are many poor or fake SD cards in current market
Q: When you open the GPRS function, the interval is 30s, human or animals is moving in
the monitoring region, but in 30s to 2mins,the camera didn't take any pictures?
A: Because when you start GPRS function, after taken one picture, the camera will search the
signal automatically, in the meantime it will send the MMS to your email or mobile, the
camera system will spend 20s to 2mins to complete this process. During this process, even it
have triggering, maybe can't capture the picture.
Q: Open GPRS function, and setup capture number is 1 or 2 pictures, but when we read
the SD card, it will have 640*480 photos?
A:If you open GPRS function, setup capture number is 1or 2 pictures, the camera will save the
- 27 -