A. When the human (or animals) move to PIR area (PIR 100°),but they didn't enter into
Camera view area (62°), the camera start taking photos ,SG-660series have been increased
the PIR and camera lens angle. The camera range is more width. Maybe the image looks like
empty same as false triggering.
B. When the human (or animals) move to Camera view area, the camera start regular taking
photos with high quality.
C. The camera will not react to the motion of human (or animals) after they leave the PIR area.
Notice: when the human or animals enter into A or B area ,maybe they are moving very
fast.From the PIR detect the moving , till the camera lens start to take the pictures, it
need few seconds to start the camera system. It is recommended to setup capture
number 2 or 3 photos.
Default setting: 0s
In Interval mode:
a) Press Up or Down to select 0-60mins
b) Press OK to save the current setting
c) Press Left for cancel setting operation without any saving and return to last step.
d) Press Menu return to Test mode
⑼ Video Frames : 30/15 fps
Default setting: 30 fps
In Video Frames mode:
a) Press Up or Down to select 30/15 fps
b) Press OK to save the current setting
c) Press Left for cancel setting operation without any saving and return to last step.
- 15 -