Table of Contents
Advertisement
5. Enter into Send To mode, enter the phone number or email which the MMS to be sent
In Send To mode, there are two inputs, Phone and Email.
Suggested to input 3 or more cell phone number and e-mail box each to avoid any images
missing, due to the mobile operators are different, and signal is not so stable per different cell
phone, as well as mailbox server are different.
Phone:
Phone Number1
Phone Number2
Phone Number3
Phone Number4
Email:
Email Adress 1
Email Adress 2
Email Adress 3
Email Adress 4
There are two ways to input the phone number and email address:
1: Press Ok enter into Phone or Email setting. Press Up/Down, Left/Down, select the digits,
letters or punctuations. Press OK for saving current setting,press the "←"(cancel)on the
display to delete.
2. Easy access to GPRS setting (edit in the computer)
a. Load the fully charged batteries or connect with power supply.
b:Insert SD card and SIM card, power on and entering into the TEST mode. And
setup the GPRS mode is ON position. and In Send to mode, press OK enter into Phone
Number1 or Email Address 1 , no need input any words, just need click Menu button for log
out，a new file named "GPRS.DAT" is created automatically in the SD card. In Test mode, and
connect computer with USB, Reedit the file" GPRS.DAT" as WORD OR TXT format. It will
show below data and save the data automatically in the camera:
URL=mmsc.monternet.com
APN=cmwap
IP=10.0.0.172
Port=80
Tel1=
Tel2=
- 36 -
Hide quick links:
Advertisement
Table of Contents
