Adjusting The Headrest - Britax Encore 10 Instructions For Installation And Use Manual

Child booster seat
Table of Contents

Advertisement

HOW TO SETUP
A. The headrest can be adjusted to lock into different height
locations. This can be done with the child in the seat.
B. Hold backrest as shown and squeeze the headrest
adjustment handle at the back of the headrest with the
other hand, to move the headrest up or down.
CAUTION:
Keep hands away from gap at the back of the lower
backrest whilst adjusting.
C. Adjust the headrest height so that the bottom of the sash
guide is level with or just above your child's shoulder
(but not more than 30mm above).
D. When the headrest is in the correct position let go of the headrest adjustment handle and
ensure it has locked into place.
Do not adjust the headrest by pulling on the Side Impact Cushion.
12
Instructions for Installation & Use - Series No. 4900/A/2010

ADJUSTING THE HEADREST

Less than 30mm
Greater than 30mm
A
B
C

Advertisement

Table of Contents
loading

Table of Contents