Table of Contents
Advertisement
CARE & MAINTENANCE
TO REPLACE COVER
A. To replace base cover, Slide on base cover and
feed through SLIDEGUARD™clip and the knob
then loop elastic over the back of the base.
Feed the
SLIDEGUARD™clip
through slot
Feed the knob
through slot
B. To replace headrest, adjust the headrest height
to the highest position. Pull elastic over the air
cushions and tuck behind. Attach the elastic
loops to the hooks at the back of the red sash
guides. Refit cover around headrest. Ensure that
the headrest is tucked in the channel around the
red sash guides, so that the sash guide text is
clearly visible.
C. Replace middle cover, tuck in
plastic flaps from both ends
of the booster wings (see
illustration). Do not loop elastic
at the bottom of the middle cover
over the booster seat, this is
placed at the front of the middle
cover. Feed elastic through the
wings (see illustration). Insert
cover into the channel running
along the edge of the wings.
D. Replace cup holder if needed.
34
Instructions for Installation & Use - Series No. 4900/A/2010
Hook elastic from underneath booster
Replace elastic from
behind air cushion
A
Hook elastic behind headrest
Tuck Plastic
Flaps in slots
Tuck Plastic
Flaps in slots
C
A
B
C
Feed cover
into channel
Advertisement
Table of Contents
