Table of Contents
Advertisement
ACCESSORIES
MESSY MAT SEAT PROTECTOR (IF SUPPLIED)
Place ribbed or pocket end of the Messy Mat seat
protector on edge of car seat, smooth back toward
seat join ('A') and fit in any excess Messy Mat into the
join of the car seat ('A').
Hook and loop attachment referred in some instruction
books, are no longer required to fit this model of Messy
Mat seat protector.
CAUTION:
The pocket is only for small, light items.
DO NOT overload the pocket with heavy, bulky
items as this may damage the pocket or cause
passengers to trip over them.
CUP HOLDER (IF SUPPLIED)
To use the cup holder, Slide the cup holder through the slot
in the cover then into the slot on the side of the booster seat
base and click into place.
IMPORTANT:
Only use for holding cups, bottles and drink cartons.
Do not use for hot drinks.
Ensure the cup holder contents cannot be crushed by
the car door. Use of the cup holder may limit the seat
space next to this restraint.
Side of booster seat, trim removed
for illustration
36
Instructions for Installation & Use - Series No. 4900/A/2010
Slot for cup holder
Slide the cup
holder into slot
Short
Messy
Mat
'A'
Advertisement
Table of Contents
