Table of Contents
Advertisement
INSTALLING INTO VEHICLE
A. Position the restraint in the car forward facing in the
chosen seating position. Adjust the headrest to the
correct height for your child (refer to page 11). Ensure
the seating position has a child restraint anchorage
fitting. Refer to the car owner's handbook. If no fitting is
provided refer to anchor fitting information on pages 38
to 40.
B. Lengthen the upper anchorage strap by removing the
excess strap from the storage band, then press the
adjuster button (1) and pull the strap with the attachment
clip (2). Hook the attachment clip to the anchor fitting.
Make sure to remove any twists from the Upper
Anchorage Strap.
Storage
Band
C. Tighten Adjustable Upper Anchorage Strap by pulling
adjusting strap (3) to remove slack. Do not tighten
causing the restraint base to lift off the vehicle seat.
Always attach hook and remove slack.
D. Fold up excess strap and use storage band to neatly store
away from child's reach and secure with the hook and
loop storage strap.
HOW TO INSTALL
1
2
3
Storage
Band
Instructions for Installation & Use - Series No. 4900/A/2010
A
Attachment Clip
Anchor
Fitting
B
Pull to remove slack
C
Fold up excess
strap and store with
the storage band.
D
15
Advertisement
Table of Contents
