Shoulder Height Markers - Britax Encore 10 Instructions For Installation And Use Manual

IMPORTANT: Follow this advice.
Label A Smaller Child - Lower Marker
A Child who has outgrown their child restraint with in-built harness will have their shoulders
in line or above the lowest shoulder height marker (label A) of this booster seat with the
headrest in the lowest
position. If the child's
shoulders are below
this marker the child
needs to stay in their
child restraint with an
in-built harness.
Label B Larger Child - Upper Marker
The seat can be used until the child's shoulders reach the Upper Marker (label B) with the
headrest fully raised. Usually the shoulders will contact the bottom of the headrest, it is
then time to move
to the next form of
restraint.
For maximum safety
continue to use this
seat as long as the
child fits in the seat.
Next type of restraint that can be used in the car for your child.
When your child has outgrown the seat, you can then either use:
Just the car's lap-sash
seatbelt.

SHOULDER HEIGHT MARKERS

Instructions for Installation & Use - Series No. 4900/A/2010
AND THE NEXT SEAT
Or you can use a
Child Harness and lap
seatbelt. Lap seatbelts
can be dangerous
without a Child
Harness.
7