Table of Contents
Advertisement
TO REMOVE COVER
A. Remove middle cover first
by pulling out plastic flaps
from both the ends of the
wings (see illustration).
Pull out the cover from the
channel running along the
edge of the wings.
B. To remove headrest, pull elastic from behind the
air cushions and unhook the elastic from behind
the red sash guides (see illustration). Peel away
from headrest.
C. To remove base cover, if fitted first unclip the
cup holder. Feed through the SLIDEGUARD™clip
and the knob then pull elastic away from bottom
back of booster and slide off cover.
Unhook elastic from underneath booster
IMPORTANT :
Remove the Instruction Book from the pocket in the base cover before washing.
CARE & MAINTENANCE
Remove
Plastic Flaps
Remove
Plastic Flaps
A
Unhook elastic from behind headrest
Slide cover
C
off base
Instructions for Installation & Use - Series No. 4900/A/2010
Pull out cover
from channel
Remove elastic from
behind air cushion
A
B
C
33
Advertisement
Table of Contents
