Britax Encore 10 Instructions For Installation And Use Manual page 31

Child booster seat
Table of Contents

Advertisement

TO REMOVE RESTRAINT FROM VEHICLE
TO REMOVE RESTRAINT FROM VEHICLE
A. If a Child Harness is used, feed seatbelt out through
Child Harness.
B. Disconnect the attachment clip from the car whilst lifting
the seat slightly to slacken the upper anchorage strap.
This leaves the Child Harness fitted to the booster seat
and allows the seat to be put back with no adjustment to
the Child Harness if it is in the same vehicle).
IMPORTANT :
The Gated Slide must be removed from the seatbelt if the booster seat
and Child Harness are no longer used in the car to allow other users
to use the seatbelt as a lap-sash seatbelt.
Instructions for Installation & Use - Series No. 4900/A/2010
Attachment Clip
Anchor Fitting
31

Advertisement

Table of Contents
loading

Table of Contents