Table of Contents
Advertisement
HOW TO INSTALL WITH A CHILD HARNESS
USING LAP SEATBELT WITH THE CHILD HARNESS
Fit the Child Harness as detailed on page 20. Thread the lap seatbelt through the Child
Harness strap loops as shown right. Ensure there are no twists in the Child Harness, cross
strap and seatbelt.
Connect the Harness to the VERSATETHER™
Catch as detailed on page 18.
A. With the child seated, place each of the Child
Harness straps over each shoulder.
B. Feed the right hand strap (loop end) into the
cross strap loop to connect the two sides.
C. Feed the adult belt (lap belt or converted
lap/sash) through the harness loops,
ensuring that the cross strap loop does not
disconnect. Also ensure there are no twists in
the Child Harness, cross strap and seatbelt.
1. Left Hand Harness Strap
2. Right Hand Harness Strap
3. Storage strap
4. Cover Pad
5. Right Hand Harness Strap Loop
6. Cross Strap Loop
7. Cross Strap
8. Attachment Clip
28
Instructions for Installation & Use - Series No. 4900/A/2010
Child Harness
strap loops
SLIDEGUARD™
Clip
Pull to remove
slack
4
3
5
6
7
8
2
1
Advertisement
Table of Contents
