Table of Contents
Advertisement
Quick Links
Adjuster Strap
Replacement Instructions
for Marathon
& Wizard
™
Items required:
-Scissors
-New adjuster strap
1
Cut old adjuster strap.
5
Attach shoulder straps to yoke on
new adjuster strap.
IMPORTANT: Attachment must be
exactly as shown in photo for correct
alignment. White tab must be toward seat.
Overview: Front
™
2
Completely loosen shoulder straps by
lifting the adjuster lever while pulling
the harness straps forward.
WIZARD ONLY:
before proceeding.
6
Drop loose end of adjuster strap
between black belt guide and rear of
seat.
Fully raise headrest
Overview: Rear
3
From rear of seat, pull straps up to
remove yoke from behind belt guard,
then slide both shoulder straps off metal
yoke.
4
Discard old adjuster strap.
7
Route loose end of adjuster strap over
base to the front.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Britax Marathon E9L06
Summary of Contents for Britax Marathon E9L06
- Page 1 Overview: Front Overview: Rear Adjuster Strap Replacement Instructions for Marathon & Wizard ™ ™ Items required: -Scissors -New adjuster strap From rear of seat, pull straps up to Cut old adjuster strap. Completely loosen shoulder straps by remove yoke from behind belt guard, lifting the adjuster lever while pulling then slide both shoulder straps off metal the harness straps forward.
- Page 2 Pull strap over base to the front of the From the bottom of the seat, thread Pull strap through completely. restraint. adjuster strap through slot behind adjuster to the top of the seat. NOTE: To access bottom of adjuster area, lay seat on its back, with the base toward you.
Need help?
Do you have a question about the Marathon E9L06 and is the answer not in the manual?
Questions and answers