Table of Contents
Advertisement
HOW TO INSTALL WITH A CHILD HARNESS
TO REMOVE CHILD FROM
HARNESS AND SEAT
Disengage seatbelt tongue and buckle,
remove the lap portion of seatbelt from the
SLIDEGUARD™clip (where provided) and remove
Child Harness and belt from child. When Booster
is not being used, secure in position, by engaging
seatbelt over the booster seat or store in a safe
place.
NOTE: It maybe easier to unthread the car
seatbelt out of the loops before lifting the
child harness over the child's head.
Once the child is too large for the booster seat,
the child harness can still be used and is a
significant safety device for children in a lap only
seatbelt. Refer to the child harness instruction
book.
IMPORTANT:
Use seatbelt to hold the child
restraint when not in use.
IMPORTANT: ALWAYS USE THE SLIDEGUARD™ CONVERTER
When Booster is not being used, secure in position, by engaging seatbelt over the booster
seat or store in a safe place.
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.
30
Instructions for Installation & Use - Series No. 4900/A/2010
:
Lift child harness strap
over child's head.
Advertisement
Table of Contents
