Camera Function Menu - JVC CONNECTED CAM GY-HC500U Instructions Manual

Camera Function Menu

Menu screen for specifying operation settings
during shooting.
This item can only be selected in the Camera
mode.
Bars
For setting whether to output color bars.
[Setting Values: On, ROff]
Memo :
The audio test signals (1 kHz) can be output
0
simultaneously with the color bar output.
(A P136 [ Test Tone ] )
OIS
For setting whether to enable image stabilizer.
When "On" is selected, set the Level.
To turn on the [Hard Lock] function, configure OIS
to "Off".
[Setting Values: On, ROff]
(A P73 [Using the Image Stabilizer] )
9 Level
For setting the level of the image stabilizer.
[Setting Values: High, RNormal]
Memo :
The icon changes according to the level set.
0
(A P168 [Image Stabilizer Mark] )
When "High" is selected, correcting severe
0
camera shake may cause the area surrounding
the image to darken.
9 Hard Lock
When the Hard Lock feature is "On", the IS (image
stabilization) lens is locked in place.
Use this feature when blurry image caused by
camera shake tends to occur due to strong
acceleration.
[Setting Values: On, ROff]
(A P73 [About the Hard Lock Feature] )
Memo :
Camera shake that causes image blur occurs
0
when switching between "On" and "Off".
Shutter
For specifying shutter-related settings.
Configure the value to "Step" (fixed value) or
"Variable" when operating the shutter with the
cross-shaped button (J K) on the side of the
camera recorder unit.
Variable:
0
Sets to variable scan. Use this setting when
shooting a PC monitor.
Step:
0
Sets to step shutter, which switches the shutter
speed by a fixed value.
[Setting Values: Variable, RStep]
AE Level
For setting the convergence level during AE (Auto
Exposure).
This can also be adjusted using the cross-shaped
button (H I) on the side of the camera recorder
unit.
[Setting Values: -6 to +6 (R0)]
AE Speed
For setting the convergence speed during AE (Auto
Exposure).
[Setting Values: RFast, Middle, Slow]
AE Area
For configuring the AE detection area.
[Setting Values: Center, Bottom, RNormal]
AGC Limit
For setting the maximum gain value of "AGC",
which electrically boosts the sensitivity level
according to the brightness automatically.
When [LCD/VF] B [Display Type] B [Gain] is set
0
to "dB":
[Setting Values: 24 dB, R18 dB, 12 dB, 6 dB]
When [LCD/VF] B [Display Type] B [Gain] is set
0
to "ISO":
[Setting Values: ISO 12800, RISO 6400, ISO
3200, ISO 1600]
Memo :
When [FULL AUTO] is set to "ON", this item
0
appears as "---" and cannot be selected.
Camera Function Menu
111