Camera Function Menu
Menu screen for specifying operation settings
during shooting.
This item can only be selected in the Camera
mode.
Bars
For setting whether to output color bars.
[Setting Values: On, ROff]
Memo :
The audio test signals (1 kHz) can be output
0
simultaneously with the color bar output.
(A P106 [ Test Tone ] )
OIS
For setting whether to enable image stabilizer.
When "On" is selected, set the Level.
[Setting Values: ROn, Off]
9 Level
For setting the level of the image stabilizer.
[Setting Values: High, RNormal]
Memo :
The icon changes according to the level set.
0
(A P117 [Image Stabilizer Mark] )
When "High" is selected, correcting severe
0
camera shake may cause the area surrounding
the image to darken.
Flicker Correction
For setting whether to adjust image flicker that
occurs under a fluorescent light.
[Setting Values: On, ROff]
Shutter
For specifying shutter-related settings.
Set to "Step" (fixed value) or "Variable" when
operating with the J / K volume buttons on the side
of the camera recorder.
Variable:
0
Sets to variable scan. Use this setting when
shooting a PC monitor.
Step:
0
Sets to step shutter, which switches the shutter
speed by a fixed value.
[Setting Values: Variable, RStep]
90
Camera Function Menu
AE Speed
For setting the convergence speed during AE (Auto
Exposure).
[Setting Values: RFast, Middle, Slow]
AGC Limit
For setting the maximum gain value of "AGC",
which electrically boosts the sensitivity level
according to the brightness automatically.
[Setting Values: 24dB, 18dB, R15dB, 12dB, 6dB]
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when
auto iris is enabled.
[Setting Values: F4, F2.8, RF2, F1.8, F1.6, F1.4,
F1.2]
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when
auto iris is enabled.
[Setting Values: F11, F8, RF5.6, F4]
EEI Limit
For setting the shutter speed control range when
the Automatic Shutter mode (EEI) is enabled.
[Setting Values: 4F-stop, R3F-stop, 2F-stop]
Smooth Trans
For setting the shock reduction function, which
slows down the sudden change when switching
with the [GAIN] or [WHT.BAL B/A/PRST] switch.
[Setting Values: Fast, Middle, Slow, ROff]
Memo :
This function is disabled when AGC is operating.
0