Setting Zebra Pattern - JVC GY-HC500E Instructions Manual

Setting Zebra Pattern

When the luminance level range for displaying
zebra patterns is specified, diagonal lines (zebra
pattern) are displayed at areas with the specified
luminance levels during shooting.
1 Set [LCD/VF] B [Shooting Assist] B [Zebra]
to "On".
(A P128 [ Zebra ] )
2 Specify the brightness (luminance) level
range for displaying zebra pattern.
Specify the upper and lower limits of the
luminance level in [LCD/VF] B [Shooting
Assist] B [Zebra] B [Top] and [Bottom].
Item Settings
Top Upper luminance
limit for displaying
[Zebra]
Bottom Lower luminance
limit for displaying
[Zebra]
Memo :
The timing to detect the zebra pattern display
0
can be configured only when "J-Log1" or "HLG"
is selected in [Color Space] and "Cam" or "Cam
+ Return" is selected in [Convert to ITU709].
(A P119 [ Color Space ] )
(A P127 [ Convert to ITU709 ] )
(A P128 [ Detect ] )
82
Setting Zebra Pattern
Options
5%, 10% to 95%,
98%, 100%, Over
0%, 5% to 95%,
98%, 100%
3 Display the zebra pattern.
Press the [ZEBRA/5] button to display the zebra
pattern in the specified range.
.
During zebra pattern display,
is displayed on the display screen in Camera
mode.
Memo :
"Zebra" is assigned to [ZEBRA/5] button in
0
factory default.
"Zebra" can also be assigned to other user
0
buttons.
(A P46 [Assignment of Functions to User
Buttons] )
(zebra icon)