Setting Zebra Pattern - JVC JY-HM360E Instructions Manual

Settings and Operation of the Camera
Recorder
1 Set to Camera mode.
(A P14 [Operation Modes] )
2 Set [TC/UB] B [TC Generator] as follows.
Slave device:
0
Select "Free Run(Ext)".
Master device:
0
Select "Free Run".
3 Set LCD monitor or viewfinder to Display 1
screen.
4 Set the master device and run the time
code.
When the built-in time code generator is
0
synchronized with the external time code
data input, the Z icon on Display 1 screen
lights up.
When time code is not synchronized or time
0
code input is not available, the Z icon goes
out.
4030 20 10 0
.
Memo :
The built-in time code generator will continue
0
operation even when the master device is
disconnected after synchronization.
User's bit will become data in the master device.
0
While the [TC] terminal is connected, the time
0
code may be out of synchronization when the
[A/V Set] B [Video Set] B [HDMI out] setting of
the Master device and Slave device is being
changed.
(A P100 [ HDMI out ] )
00: 00: 00.00
Jan 24, 2012
12 :34 : 56
5 . 6f t
AE 6
+
0
dB
F1.6
P 13000K 1/ 100

Setting Zebra Pattern

When the luminance level range for displaying
zebra patterns is specified, diagonal lines (zebra
pattern) are displayed at areas with the specified
luminance levels during shooting.
.
1 Set the zebra display pattern.
Select the display pattern in [LCD/VF] B
[Shooting Assist] B [Zebra].
2 Specify the brightness (luminance) level
range for displaying zebra pattern.
Specify the upper and lower limits of the
luminance level in [LCD/VF] B [Shooting
Assist] B [Zebra] B [Top] and [Bottom].
Item Settings
Top Upper luminance
limit for displaying
[Zebra]
Bottom Lower luminance
limit for displaying
[Zebra]
3 Display the zebra pattern.
Press the [ZEBRA/5] button to display the zebra
pattern in the specified range.
.
During zebra pattern display,
is displayed on the display screen in Camera
mode.
Memo :
"Zebra" is assigned to [ZEBRA/5] button in
0
factory default.
"Zebra" can also be assigned to other user
0
buttons.
(A P34 [Assignment of Functions to User
Buttons] )
Synchronizing Time Code on Another Camera
ZEBRA/5
Options
5% - 95% (in 5 %
increments), 98%,
100%, Over
0% - 95% (in 5 %
increments), 98%,
100%
(zebra icon)
65