46
Accessing the Calibration modes
Accessing
Calibration Modes
Calibration
Modes
Adjusting calibration values
To adjust calibration values;
1. Access the required calibration mode (refer to the diagram above).
disp
2. Press
press and hold
-1
+1, -10
,
3. Use
When you have made all required changes, press and hold
save changes and exit.
SmartPilot X-5 Tiller & GP Tiller Installation & Setup Guide
2 seconds
to scroll through the available options. To view the previous option,
disp
for 1 second.
+10
and
to change the values.
2 seconds
(saves changes)
to enter display
calibration mode
to enter user
calibration mode
to enter seatrial
calibration mode
CAL ?
to enter dealer
+
calibration mode
standby
D10647-1
for 2 seconds to