Raymarine SmartPilot X5 Installation & Setup Manual page 20

12
Use the following table to determine the required position for your vessel.
Drive pin
distance from
rudder stock
457 mm (18")
standard distance
432 mm (17")
406 mm (16")
381 mm (15")
356 mm (14")
The Tiller drive mounting arrangement is shown in the following illustration. In the
following, dimension A represents the required distance between the tiller pin and the
center of the rudder stock, as determined from the above information.
SmartPilot X-5 Tiller & GP Tiller Installation & Setup Guide
Max degrees of
helm (with pilot
engaged)
31º
33º
35º
37º
39º
620mm (24.5")
o
90
620mm (24.5")
Rate of helm
change
8 º per second
8 º per second
9 º per second
9 º per second
10 º per second
620mm (24.5")
o
90
620mm (24.5")
Force at rudder
84 kgf
79 kgf
75 kgf
70 kgf
65 kgf