18
SmartPilot X-5 Tiller & GP Tiller Installation & Setup Guide
Tiller brackets
If the tiller is higher or lower than the mounting socket, use a tiller bracket to vary the
tiller pin height so the drive is horizontal.
D
E
If the drive is below the tiller, bracket size equals dimension D.
If the drive is above the tiller; bracket size equals dimension E - 25 mm (1").
To use a tiller bracket:
1. Place the tiller bracket on the center line of the tiller (above or below) and establish
the correct position.
2. Mark the centers of the bracket mounting holes.