28
NMEA 0183 equipment
The SPX-5 Tiller system can connect to NMEA devices such as a GPS or chartplotter.
Data bridging
The SPX-5 Tiller system acts as a bridge between SeaTalk and NMEA, allowing
NMEA and SeaTalk devices to share information.
For example, the information received from an NMEA GPS could be shared with a
SeaTalk instrument to provide a separate Course Over Ground display.
NMEA 0183 / Connecting other manufacturers' equipment
•
When connecting Raymarine equipment to other equipment using a non-
Raymarine cable, you MUST attach an appropriate suppression ferrite to the
cable near to the Raymarine unit.
•
When connecting third party equipment refer to the manufacturer's instructions
for cable details.
•
You should not connect more than one piece of equipment to the Course
Computer NMEA input.
SmartPilot X-5 Tiller & GP Tiller Installation & Setup Guide
+ve
-ve
IN
IN
OUT
+ve
-ve
OUT
OUT
NMEA DEVICE
+ve
-ve
Screen not connected
OUT
+ve
-ve
IN
IN
D10539-1