Chevrolet Captiva C140 Manual page 352

9–52 NAVIGATION MANUAL
4 4 4 4 4 . . . . . 1 1 1 1 1 DESTINA DESTINA DESTINATION MANA DESTINA DESTINA TION MANA TION MANA TION MANA TION MANAGEMENT GEMENT GEMENT GEMENT GEMENT
4 4 4 4 4 . . . . . 1. 1. 1. 1. 1.1 1 1 1 1 Add or delete destination(s) Add or delete destination(s) Add or delete destination(s)
Add or delete destination(s) Add or delete destination(s)
A-Navi System allows you to add up to two
waypoints and destinations. Usually the start
point is the GPS-fixed current position.
: touch it and enter "Search Menu"
to search waypoint/destination (re-
fers to Chapter 3).
:touch it and the highlight
waypoint/destination in yellow is
deleted.
4 4 4 4 4 . . . . . 1.2 1.2 1.2 Change the sequence of destination 1.2 Change the sequence of destination Change the sequence of destination Change the sequence of destination
1.2 Change the sequence of destination
: touch it to move up the highlight
waypoint/destination.
: touch it to move down the highlight
waypoint/destination.
Gray key means the function is disabled.
4 4 4 4 4 . . . . . 1.3 1.3 Display destination on map 1.3 1.3 1.3 Display destination on map Display destination on map Display destination on map Display destination on map
In "Route Plan" screen, touch
and enter the map location of the highlight
waypoint/destination. Here allow you:
a. To pin on map and check information
of the waypoint/destination.
b. To zoom out/in;
c. To draw map in all directions
Picture 4.2 Destination on Map
4.2 ROUTE OPTIONS 4.2 ROUTE OPTIONS 4.2 ROUTE OPTIONS 4.2 ROUTE OPTIONS 4.2 ROUTE OPTIONS
A-Navi System offers you optimized settings
of navigation. These settings are the basis
parameters for calculating the route.
Touch on "Route Plan" screen
and enter "Route Options" screen(Picture
4.3).
Picture 4.3 Route Options