Chevrolet Captiva C140 Manual page 226

5–12 EMERGENCIES
How to change a flat tyre How to change a flat tyre How to change a flat tyre How to change a flat tyre How to change a flat tyre
1. Remove the jack, wheel wrench, jack
handle and spare tyre from the storage in
the luggage compartment and below the
rear bumper.
2. Use the wheel wrench to loosen the wheel
nuts by one turn each.
CAUTION CAUTION CAUTION CAUTION CAUTION
Do not remove any of the nuts until you
have raised the wheel off the ground.
<Jack Handle Type>
3. Insert the jack handle and the wheel
wrench into the jack.
4. Rotate the wheel wrench clockwise to raise
the lift head slightly.
5. Locate the jack according to the figure
below. There is a notch at the front and
rear of the vehicle under the doors.
6. Place the jack vertically at the front or the
rear jacking notch next to the wheel you
plan to change.
CAUTION CAUTION CAUTION CAUTION CAUTION
Do not attempt to raise vehicle until the Do not attempt to raise vehicle until the Do not attempt to raise vehicle until the
Do not attempt to raise vehicle until the Do not attempt to raise vehicle until the
jack is in the proper position, and secure jack is in the proper position, and secure jack is in the proper position, and secure jack is in the proper position, and secure jack is in the proper position, and secure
both to the vehicle and the ground. both to the vehicle and the ground. both to the vehicle and the ground.
both to the vehicle and the ground. both to the vehicle and the ground.