Chevrolet Captiva C140 Manual page 220

5–6 EMERGENCIES
USING THE TYRE SEALANT AND USING THE TYRE SEALANT AND USING THE TYRE SEALANT AND USING THE TYRE SEALANT AND USING THE TYRE SEALANT AND
COMPRESSOR KIT TO TEMPOR COMPRESSOR KIT T COMPRESSOR KIT T O TEMPOR O TEMPOR O TEMPORARIL ARIL ARIL ARILY Y Y Y Y
COMPRESSOR KIT T COMPRESSOR KIT T O TEMPOR ARIL
SE SEAL AND INFL SE AL AND INFL AL AND INFL AL AND INFLA A A A A TE A PUNCTURED TE A PUNCTURED TE A PUNCTURED TE A PUNCTURED
SE SE AL AND INFL TE A PUNCTURED
TYRE TYRE
TYRE TYRE TYRE
When using the tyre sealant and compressor
kit during cold temperatures, warm the kit in
a heated environment for five minutes.
This will help to inflate the tyre faster.
If a tyre goes flat, avoid further tyre and wheel
damage by driving slowly to a level place. Turn
on the hazard warning flashers.
Do not remove any objects that have
penetrated the tyre.
1. Remove the tyre sealant and compressor
kit from its storage location.
2. Unwrap the sealant/air hose (7) and the
power plug (8).
3. Place the kit on the ground.
Make sure the tyre valve stem is posi-
tioned close to the ground so the hose will
reach it.
4. Remove the valve stem cap from the flat
tyre by turning it counterclockwise.
5. Attach the sealant/air hose (7) onto the
tyre valve stem. Turn it clockwise until it
is tight.
6. Plug the power plug (8) into the accessory
power outlet in the vehicle. Unplug all
items from other accessory power outlets.