Ldap Server; Ldap Server Configurations - Grandstream Networks UCM6510 User Manual

1. Go to web GUI->Settings->Change Password page.
2. Enter the old password first.
3. Enter the new password and retype the new password to confirm. The new password has to be at
least 4 characters. The maximum length of the password is 16 characters.
4. Click on "Save" and the user will be automatically logged out.
5. Once the web page comes back to the login page again, enter the username "admin" and the new
password to login.

LDAP SERVER

The UCM6510 has an embedded LDAP server for users to manage corporate phonebook in a centralized
manner.

By default, the
"ou=pbx,dc=pbx,dc=com" based on the UCM6510 user extensions already.

Users could add new phonebook with a different Phonebook DN for other external contacts. For
example, "ou=people,dc=pbx,dc=com".

All the phonebooks in the UCM6510 LDAP server have the same Base DN "dc=pbx,dc=com".
If users have the Grandstream phone provisioned by the UCM6510, the LDAP directory has been set up
on the phone and can be used right away for users to access all phonebooks.
Additionally, users could manually configure the LDAP client settings to manipulate the built-in LDAP
server on the UCM6510. If the UCM6510 has multiple LDAP phonebooks created, in the LDAP client
configuration, users could use "dc=pbx,dc=com" as Base DN to have access to all phonebooks on the
UCM6510 LDAP server, or use a specific phonebook DN, for example "ou=people,dc=pbx,dc=com", to
access to phonebook with Phonebook DN "ou=people,dc=pbx,dc=com " only.
To access LDAP Server settings, go to web GUI->Settings->LDAP Server.

LDAP SERVER CONFIGURATIONS

The following figure shows the default LDAP server configurations on the UCM6510.
Firmware Version 1.0.0.25
LDAP server has
UCM6510 IP PBX User Manual
generated the first phonebook with PBX
Page 47 of 233
DN