Nortel CallPilot 150 Installation And Maintenance Manual page 36

36 Chapter 5 Initializing the CallPilot 100/150
Field name
Default Gateway
Base Application
Attendant DN
Primary UI Style
Primary
Language
Country
From Line
To Line
Number of rings
P0604218 02
Description
Enter the IP Address of the default next-hop router. If you do not know the IP Address,
contact your network administrator.
Note: If you do not require a next-hop router, leave this box blank.
The default base application is voicemail. If you want the base application to be Call
Center, click the CallCenter button.
If you select voicemail:
• the voicemail application is enabled
• 20 mailboxes are enabled on the CallPilot 150
• 10 mailboxes are enabled on the CallPilot 100.
If you select Call Center:
• no mailboxes are enabled
• the Call Center application is enabled
• 20 agents are enabled (10 agents are active)
• the mailbox and lines administration sections are removed from the Quick Install
Wizard screen.
Enter the extension number of the CallPilot attendant.
Select the user interface style assigned to the mailboxes. You can select NVM or
CallPilot.
If you select NVM, the mailbox user interface operates like Norstar Voice Mail and
FlashTalk. Users will hear Norstar Voice Mail voice prompts and see Norstar Voice Mail
text prompts.
If you select CallPilot, the mailbox user interface operates like Meridian 1 CallPilot.
Users will hear CallPilot voice prompts and see text prompts for CallPilot.
You can change the UI style of individual mailboxes by assigning a different Class of
Service to those mailboxes.
Select the default language that is used for voice prompts, text messages, the
Auto-Attendant and Feature 983 administration.
You can change the language of individual mailboxes by assigning a different Class of
Service to those mailboxes.
Select the country in which the CallPilot 100/150 is installed.
The country you select determines several country specific settings such as the
telephone number length, mailbox login sequence and Call Progress Tone Detection.
You must select the country that the CallPilot 100/150 is in to ensure proper operation.
The default is North America.
Enter the line number of the first line in a range of lines that you want the auto-attendant
to answer.
The auto-attendant answers this line and all of the lines up to the line number you enter
in the To Line box.
Enter the line number of the last line in a range of lines you want the auto-attendant to
answer.
The line number you enter in this box must be the same or higher than the line number
you enter in the From Line box.
Enter the number of rings that CallPilot waits before answering a line.