Configuring By Using Imported Cid File; Configuring Communication Parameters - ABB SPA-ZC 402 Installation And Commissioning Manual

Spa tcp bridge

Hide thumbs Also See for SPA-ZC 402:

Table of Contents

SPA-ZC 402

5.6.

5.7.

Ethernet Adapter

SPA/TCP Bridge

Installation and Commissioning Manual

Configuring by using imported CID file

If you have to configure several SPA-ZC 402 with the similar settings, it is possible

to import a previously generated CID file and change the communication addresses,

typically by changing the IP address.

Create a new project and add a SPAZC40x_SPA Device. Select the CID import

function by right-clicking the LD1 logical device. In the CID import dialog you can

select the right CID file from the workstation directory and import it to a previously

created logical device.

SPA-ZC 402 communication parameters are located in the device properties.

SPA-ZC 402 uses static IP addresses, which have to be defined in the planned

network structure.

For uplink network settings, see Sections 5.7.1. Uplink network settings and 5.7.2.

Communication parameters for SPA.

1MRS756019

Table of Contents