Table of Contents
Advertisement
Hard Disk Drive
To remove or replace the hard disk drive:
q
Make sure to disconnect the power and signal cables from the CD-ROM
drive and the diskette drive.
q
Remove the four screws that secure the bay holder to the metal frame of
the system unit.
q
Turn the bay holder upward and forward about 60 degree and disconnect
the signal and power cables from the hard disk.
q
Lift the securing base and remove the system unit
q
Turn the bay holder upside down and put it on the table.
q
Remove the four screws that secure the hard disk to the bay holder.
q
Lift the hard disk and remove it.
4-10
Advertisement
Table of Contents
