Speciþcations; Conformance To Requirements - Motorola MVME167 Series Installation Manual

Board Level Hardware Description
Specifications
2
Characteristics
Power requirements
(with all four EPROM sockets
populated and excluding
external LAN transceiver)
Operating temperature
Storage temperature
Relative humidity
Physical
dimensions
Double-high
VMEboard

Conformance to Requirements

2-6
Table 2-1. MVME167 General Specifications
+5 Vdc (+/- 5%)
+12 Vdc (+/- 5%)
-12 Vdc (+/- 5%)
0û to 55û C at point of entry of forced air (approximately 490
LFM)
-40û to +85û C
5% to 90% (non-condensing)
PC board with Height
mezzanine
Depth
module only
Thickness
PC board with Height
connectors and
Depth
front panel
Thickness
These boards are designed to conform to the requirements of the
following specifications:
VMEBus Specification (IEEE 1014-87)
EIA-232-D Serial Interface Specification, EIA
SCSI Specification
SpeciÞcations
3.5 A (typical), 4.5 A (max.)
(at 25 MHz, with 32MB parity DRAM)
5.0 A (typical), 6.5 A (max.)
(at 33 MHz, with 128MB ECC DRAM)
100 mA (maximum)
(1.0 A (max.) with offboard LAN
transceiver)
100 mA (maximum)
9.187 inches (233.35 mm)
6.299 inches (160.00 mm)
0.662 inches (16.77 mm)
10.309 inches (261.85 mm)
7.4 inches (188 mm)
0.80 inches (20.32 mm)