Motorola MVME167 Series Installation Manual page 157

Table D-1. Troubleshooting Steps (Continued)
Condition
III. Debug A. Debugger
prompt EPROM may be
missing.
167-Bug>
B. The board
does not appear
may need to be
at powerup, and
reset.
the board does
not auto boot.
Possible
Problem
1. Disconnect all power from your system.
2. Check that the proper debugger EPROM is
installed per this manual.
3. Reconnect power.
!
Caution
4. Restart the system by Òdouble-button resetÓ:
press the
time; release
release
5. If the debug prompt appears, go to step IV or step
V, as indicated. If the debug prompt does not
appear, go to step VI.
Try This:
Performing the next
step will change some
parameters that may
affect your system
operation.
and switches at the same
RESET ABORT
Þrst, wait Þve seconds, then
RESET
.
ABORT
D
D-3