4036-307, -308
Paper feed assembly removal
1.
Remove the ADF upper cover. See
2.
Remove the ADF optical unit. See
3.
Remove the paper feed motor. See
4.
Remove the ground wire screw (A).
5.
Unplug the three cables (B).
6.
Remove the four screws (C).
C
7.
Lift the paper feed assembly from the frame.
Note: Run registration if you are installing a new paper feed assembly. See
MENU)" on page
4-16
Service Manual
"ADF upper cover removal" on page
"ADF optical unit removal" on page
"Paper feed motor removal" on page
A
B
3-6.
4-8.
4-12.
4-17.
C
"Configuration menu (CONFIG