Table of Contents
Advertisement
4036-307, -308
Automatic Scanner Registration
To perform the Automatic Scanner Registration:
1.
Obtain two pieces of colored paper (A4 or letter) for the automatic registration. Use a light blue sheet or
other solid color paper.
2.
Touch
3.
Place a colored piece of paper in the ADF, making sure the edge guides are properly adjusted. Place
another piece of paper (A4 or letter) on the flatbed. Touch Start.
4.
The touchscreen displays DO NOT POWER OFF Scanner Registration. When complete, a screen
similar to the following should appear:
5.
Touch Continue.
3-8
Service Manual
to select Automatic Scanner Registration from the Configuration Menu.
Please place a piece of dark colored
paper on the Flatbed and in the ADF
Scanner registration
successfully completed
Start
Continue
Back
Advertisement
Table of Contents
