Table of Contents
Advertisement
4036-307, -308
Clear Log
Use Clear Log to remove the current information in the Event Log. This affects both the viewed log and the
printed log information.
1.
Touch
2.
Touch
YES is selected, Deleting EVENT LOG displays on the screen.
SCANNER TESTS
ASIC Test
A pattern appears, and ASIC Test Passed displays. If xxxxxx displays, the test was unsuccessful.
Press Stop (
Feed Test
To run the Scanner Feed test:
1.
Touch
2.
The panel displays the setting's current value
Letter, Legal, or A4.
3.
Touch START to begin.
Feed Test Testing... displays.
4.
Touch Back to return to the Diagnostics Menu.
Scanner Manual Registration
1.
Touch
2.
The panel displays the setting's current value
new value. The following settings are listed:
Scanner Manual Registration
3.
Touch Submit to make the changes.
3-4
Service Manual
to select Clear Log from the Event Log menu.
to select Yes to clear the Event Log, or touch
)
to return to the SCANNER TESTS menu.
to select Feed Test from the SCANNER TESTS menu.
to select Scanner Manual Registration from SCANNER TESTS.
FB Left Margin
FB Top Margin
ADF Front Left Margin
ADF Front Top Margin
ADF Rear Left Margin
ADF Rear Top Margin
Submit
to select NO to exit the Clear Log menu. If
[setting's current value]
[setting's current value]
0
0
0
0
0
0
Back
. Use the arrows to select from
. Use the arrows to select the
Advertisement
Table of Contents
