Table of Contents
Advertisement
4036-307, -308
Diagnostics Menu
Entering Diagnostics Menu
1.
Turn off the printer.
2.
Press and hold 3 and 6 buttons simultaneously.
3.
Turn on the printer.
4.
Release the buttons after 10 seconds.
Available tests
The tests display on the operator panel in the order shown:
Note: Some menus are not available, depending on the configuration of the printer.
Diagnostics Menu tests
EVENT LOG
Display Log
Print Log
Clear Log
SCANNER TESTS
ASIC Test
Feed test
Manual Registration
Sensor Tests
Note: For other items in the menu, see the printer service manual.
Exit
Diag Menu
3-2
Service Manual
See
See
See
See
See
See
See
Touch Exit Diag Menu to exit the Diagnostics Menu, and Resetting the Printer
displays. The printer performs a POR, and the printer returns to normal mode.
"Display Log" on page
3-3.
"Print Log" on page
3-3.
"Clear Log" on page
3-4.
"ASIC Test" on page
3-4.
"Feed Test" on page
3-4.
"Scanner Manual Registration" on page
"Sensor Tests" on page
3-4.
3-5.
Advertisement
Table of Contents
