Services Gateways - Juniper J-series Services Router J2350 Hardware Manual

JUNOS Software with Enhanced Services Hardware Guide
Table 3: Text and Syntax Conventions (continued)
Convention
> (bold right angle bracket)
JUNOS Software Documentation for J-series Services Routers and SRX-series

Services Gateways

Table 4 on page xx lists the software manuals and release notes for J-series Services
Routers running JUNOS software with enhanced services and SRX-series services
gateways running JUNOS software.
All documents are available at
Table 4: JUNOS Software Documentation for J-series Services Routers and SRX-series Services
Gateways
Book
All Platforms
JUNOS Software Interfaces and Routing
Configuration Guide
JUNOS Software Security Configuration Guide
JUNOS Software Administration Guide
JUNOS Software CLI Reference
JUNOS Network Management Configuration Guide
JUNOS System Log Messages Reference
xx
JUNOS Software Documentation for J-series Services Routers and SRX-series Services Gateways
Description
Separates levels in a hierarchy of J-Web
selections.
http://www.juniper.net/techpubs/
Description
Explains how to configure J-series and SRX-series interfaces
for basic IP routing with standard routing protocols, ISDN
service, firewall filters (access control lists), and
class-of-service (CoS) traffic classification.
Explains how to configure and manage J-series and
SRX-series security services such as stateful firewall policies,
IPsec VPNs, firewall screens, Network Address Translation
(NAT), Public Key Cryptography, chassis clusters, Application
Layer Gateways (ALGs), and Intrusion Detection and
Prevention (IDP).
Shows how to monitor J-series and SRX-series devices and
routing operations, firewall and security services, system
alarms and events, and network performance. This guide
also shows how to administer user authentication and access,
upgrade software, and diagnose common problems.
Provides the complete configuration hierarchy available on
J-series and SRX-series devices. This guide also describes
the configuration statements and operational mode
commands unique to these devices.
Describes enterprise-specific MIBs for JUNOS software. The
information in this guide is applicable to M-series, T-series,
EX-series, J-series, and SRX-series devices.
Describes how to access and interpret system log messages
generated by JUNOS software modules and provides a
reference page for each message. The information in this
guide is applicable to M-series, T-series, EX-series, J-series,
and SRX-series devices.
Examples
In the configuration editor hierarchy,
select Protocols>Ospf.
.