Juniper J-series Services Router J2350 Hardware Manual page 122

JUNOS Software with Enhanced Services Hardware Guide
Figure 54: Connecting to the Gigabit Ethernet Port on J2320 and J2350 Routers
Figure 55: Connecting to the Gigabit Ethernet Port on J4350 and J6350 Routers
Connecting to the CLI Locally
If you plan to use the CLI to configure the router, you must connect through the
console port, as shown in Figure 56 on page 100 and Figure 57 on page 100.
NOTE: Figure 56 on page 100 and Figure 57 on page 100 show a connection to a local
management device. A remote connection to the router through a modem requires
the cable and connector shown (provided in the router's accessory box), plus a DB-9
female to DB-25 male (or similar) adapter for your modem, which you must purchase
separately.
98
Connecting to a Services Router