Chapter 11 Network Cable Specifications And Connector Pinouts; Serial Pim Cable Specifications - Juniper J-series Services Router J2350 Hardware Manual

Chapter 11
Network Cable Specifications and
Connector Pinouts

Serial PIM Cable Specifications

Table 49: 2-Port Serial PIM Cables and Connectors
Name Connector
RS-232 DTE DB-25 male
RS-232 DCE DB-25 female
RS-422/449 (EIA-449) DC-37 (DB-37) male
DTE
RS-422/449 (EIA-449) DC-37 (DB-37) female
DCE
The network interfaces supported on the router accept different kinds of network
cable.
Serial PIM Cable Specifications on page 179
Fast Ethernet RJ-45 Connector Pinout on page 189
Gigabit Ethernet uPIM RJ-45 Connector Pinout on page 189
Gigabit Ethernet ePIM RJ-45 Connector Pinout on page 190
Chassis Console Port Pinouts on page 190
E1 and T1 RJ-48 Cable Pinouts on page 191
E3 and T3 BNC Connector Pinout on page 194
ADSL and G.SHDSL RJ-11 Connector Pinout on page 194
ISDN RJ-45 Connector Pinout on page 195
The 2-port serial PIM uses the cables and connectors summarized in
Table 49 on page 179. Pinouts are detailed in Table 50 on page 180 through
Table 59 on page 188.
Connector Hardware
4-40 threaded
jackscrews
4-40 threaded jacknuts
4-40 threaded
jackscrews
4-40 threaded jacknuts
End-to-End
Conductors Pinouts
13 Table 50 on page 180
13 Table 51 on page 181
25 Table 52 on page 181
25 Table 53 on page 183
Serial PIM Cable Specifications
179