Tuning The Engine; Adjusting The Engine Characteristic - KTM 690 SMC R EU 2015 Owner's Manual

16

TUNING THE ENGINE

16.1

Adjusting the engine characteristic

Preparatory work
–
Switch off the ignition by turning the ignition key to position OFF
–
Remove the seat. (
Main work
–
Pull the Map‑Select switch and holder
–
Pull the Map‑Select switch out of the holder.
102019-10
–
Turn the adjusting wheel until the desired digit is next to marking
Set the Map‑Select switch to Soft.
–
Set the adjusting wheel to position 1.
Soft – reduced homologated peak performance for better driveability.
Set the Map‑Select switch to Advanced.
–
Set the adjusting wheel to position 2.
Advanced – homologated performance with extremely direct responsiveness.
Set the Map‑Select switch to Standard.
–
Set the adjusting wheel to position 3, 4, 5, 6, 7, 8 or 9.
601802-10
Standard – homologated performance with balanced responsiveness.
Set the Map‑Select switch to poor fuel quality.
–
Set the adjusting wheel to position 0.
Poor fuel quality – homologated performance is reduced in accordance with the
fuel quality, use for no more than 1 tank of fuel
p. 75)

upward off of the retaining bracket.
141
.

.